SammsonConcrete & Construction
Concrete front entrance steps with even risers leading up to the door of a house

Our services

Concrete Stairs & Steps in Calumet City & Chicagoland

Front steps, back steps and stoops poured with even risers, solid footings and a finish that does not get slick.

What we do

Concrete Stairs & Steps

Steps are the piece of concrete most likely to hurt somebody when they go wrong. Uneven risers, a stoop pulling away from the house or a slick tread are all worth fixing properly.

We pour new stairs and replace failing ones, with footings taken below the frost line so the flight does not settle away from the door it serves.

What we build

  • Front entrance steps and stoops
  • Back and side door steps
  • Basement and areaway stairs
  • Replacement of settled or crumbling flights
  • Landings tied into a new walkway

Why Sammson

What you get out of it

  • Even risers

    Every step in the flight is the same height, which is what stops the missed footing at the top.

  • Footings below frost

    Stairs settle when they sit on shallow fill. The footings go deep enough that they do not.

  • Tied to the landing

    The flight and the stoop are poured to work together instead of drifting apart over a few winters.

  • A tread you can trust

    Treads are finished for traction and edges are tooled so they do not chip off under a shovel.

How we work

How the job runs

Seven steps, in this order, every time. Skipping any of them is where concrete jobs go wrong.

  1. On-site assessment

    We come out, measure the area, look at drainage and at how the existing concrete has failed, and talk through what you want. You get a written quote with no obligation.

  2. Removal of the old slab

    When there is old concrete in the way, we break it out and haul it off. Nothing new gets poured on top of a slab that is already failing.

  3. Grading and base prep

    We grade the sub-base for slope and drainage and compact the stone underneath. In Chicagoland this is the step that decides whether the slab survives the freeze-thaw cycle.

  4. Forming and reinforcement

    Forms go in to hold the shape and the edges you asked for, straight or curved, with reinforcement sized to what the slab has to carry.

  5. The pour

    Concrete goes in, gets screeded and floated, and control joints are cut where the slab is meant to crack so that it does not crack anywhere else.

  6. Finish and seal

    Broom finish for grip, or a stamped pattern and colour if that is what you chose. Decorative work is sealed to protect the colour.

  7. Clean-up and cure

    We clean the site before we leave and tell you exactly how long to stay off it and how to look after it through the first winter.

What customers say

What customers said

  • Stamped patio, custom shape

    A homeowner asked for a stamped patio in a custom octagonal shape. Sammson built it to that shape, kept them informed about the pour, the colour and the sealing as the work went on, and left the site clean at the end.

    Reported by a homeowner on Angi

  • On time, on budget

    Done on time and under budget — highly recommend.

    Review on Angi

Questions we get asked

Before you call

Can you match my existing steps?

Usually, yes — we match rise and run and the general look. If the existing risers are uneven, we will tell you, because copying that is not doing you a favour.

Can you add a railing?

We set the anchors for a railing in the pour when you ask for it, so the railing installer has solid fixings to work with.

My stoop is pulling away from the house. Is that repairable?

It means the fill under it has settled. That is a replacement with proper footings, not a patch — a patch on a moving stoop opens up again.

Request a quote

Ready for a free quote?

Tell us what you need and we will come out, measure it and put a written price in your hands. No obligation.

(708) 916-3945Free Quote