SammsonConcrete & Construction
Stamped decorative concrete patio installed by Sammson Concrete, Chicagoland

Our services

Decorative & Stamped Concrete in Chicagoland

Stamped patterns and integral colour that give a slab the look of stone or brick, sealed to keep it.

What we do

Decorative & Stamped Concrete

Stamped concrete is a normal slab with a pattern pressed into it while it is still workable, plus colour worked through the mix and a release colour on top.

Done right it gives you the look of flagstone, slate or brick as one continuous surface, with no joints for weeds to grow through. Done in a hurry it looks like stamped concrete. The difference is in the timing of the pour, the pattern layout and the sealing.

Patterns and colours

  • Random stone and flagstone patterns
  • Slate and seamless textures
  • Running-bond and herringbone brick
  • Contrasting borders and inset bands
  • Integral colour with a release accent

Why Sammson

What you get out of it

  • The look without the joints

    One continuous slab, so nothing shifts, sinks individually or grows weeds between units.

  • Colour worked through

    Integral colour goes through the mix rather than sitting on the surface as a coating that wears off.

  • Custom shapes

    Octagons, curves and bordered layouts are laid out on site before the pour, not improvised during it.

  • Sealed and explained

    It gets sealed before we leave and you get told when to reseal, because that is what keeps the colour.

How we work

How the job runs

Seven steps, in this order, every time. Skipping any of them is where concrete jobs go wrong.

  1. On-site assessment

    We come out, measure the area, look at drainage and at how the existing concrete has failed, and talk through what you want. You get a written quote with no obligation.

  2. Removal of the old slab

    When there is old concrete in the way, we break it out and haul it off. Nothing new gets poured on top of a slab that is already failing.

  3. Grading and base prep

    We grade the sub-base for slope and drainage and compact the stone underneath. In Chicagoland this is the step that decides whether the slab survives the freeze-thaw cycle.

  4. Forming and reinforcement

    Forms go in to hold the shape and the edges you asked for, straight or curved, with reinforcement sized to what the slab has to carry.

  5. The pour

    Concrete goes in, gets screeded and floated, and control joints are cut where the slab is meant to crack so that it does not crack anywhere else.

  6. Finish and seal

    Broom finish for grip, or a stamped pattern and colour if that is what you chose. Decorative work is sealed to protect the colour.

  7. Clean-up and cure

    We clean the site before we leave and tell you exactly how long to stay off it and how to look after it through the first winter.

What customers say

What customers said

  • Stamped patio, custom shape

    A homeowner asked for a stamped patio in a custom octagonal shape. Sammson built it to that shape, kept them informed about the pour, the colour and the sealing as the work went on, and left the site clean at the end.

    Reported by a homeowner on Angi

  • On time, on budget

    Done on time and under budget — highly recommend.

    Review on Angi

Questions we get asked

Before you call

Can you do a custom shape?

Yes. Octagonal, curved and bordered patios are laid out and formed before the pour so the pattern lands the way it should.

How often does it need resealing?

Every few years in this climate, depending on sun and de-icing salt. We tell you what we sealed it with so you can match it.

Does stamped concrete crack?

All concrete moves. Control joints are placed into the pattern so the movement follows the lines of the stamp instead of running across the middle.

Request a quote

Ready for a free quote?

Tell us what you need and we will come out, measure it and put a written price in your hands. No obligation.

(708) 916-3945Free Quote